Lexmark W820 Service Manual - Page 143
Kit Bracket Assembly and Screw Removal
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
4025-Finisher Kit Bracket Assembly and Screw Removal Removal 1. Place several-ply cardboards or newspapers on the floor, and carefully tumble the Finisher from the left side. 2. Remove two Thumbscrews on the front side. 3. Sliding the Bracket Assembly on the front side toward the inside, remove the Bracket Assembly. 4. For the Bracket Assembly and Thumbscrews on the rear side, perform the above steps in the same manner. Replacement Note: Align the holes on both front and rear sides of the Frame Post with the holes on both front and rear sides of the Finisher. 1. Align two pins on the front side of the Bracket Assembly with the holes in the Finisher. 2. Push in the Bracket Assembly on the front side up to the specified position, and secure it with two Thumbscrews. 3. For the Bracket Assembly and Thumbscrews on the rear side, perform the above steps in the same manner. 4. Erect the Finisher carefully. Removal and Replacement Procedures 4-35