Lexmark W820 Service Manual - Page 194

4025-Finisher Removal 1. Remove the Cover-Jogging. 2. Remove the Cover-Top, Front. 3. Remove the Compiler Roll and Roll Shaft. Note: In the following steps, removing the Lever, Spring and Sector Gear allows the Pin inserted into the hole in the Shaft to be unsecured. Take care not to drop or lose it. 4. Remove the E-ring that secures the Lever, Spring and Sector Gear to the Shaft, and pull off the Lever, Spring and Sector Gear. 5. Remove the Pin from the Shaft. Replacement 1. Insert the Pin into the hole in the Shaft, and then the Lever into the Shaft. 2. Insert the longer hook of the Spring into the Shaft, and engage the long hook of the Spring with the upper of the Lever. 3. Insert the Sector Gear in the midway of the Shaft, and engage the shorter hook of the Spring with the lower of the Shaft. (Figure 2) 4. Turn the Sector Gear counterclockwise to hook it to the lower of the Lever. (Figure 2) 5. Secure the Lever, Spring and Sector Gear to the Shaft with an E-ring. 6. Mount the Compiler Roll and Roll Shaft. 7. Mount the Cover-Top, Front. 8. Mount the Cover-Jogging. 4-86 Service Manual