Lexmark W820 Service Manual - Page 120

4025-Finisher Replacement 1. Sliding the Link Assembly Damper so that the convex of the Solenoid Assembly is engaged with the concave of the plunger of the Solenoid Assembly, mount the Link Assembly Damper. 2. Insert the Spring Solenoid into the plunger of the Solenoid Assembly, and push the Link Assembly Damper together with the Spring Solenoid and the plunger of the Solenoid Assembly into the hole in the solenoid. 3. Align the Solenoid Assembly together with the Link Assembly Damper and Spring Solenoid with the mounting position in the Cover Assembly Solenoid, and secure them with a screw. 4. Push the Bracket Assembly Damper into the Cover Assembly Solenoid with your fingers. 5. Secure the Cover Assembly Solenoid together with the Solenoid Assembly-Gate In to the H-Tra with two screws. 6. Insert the Roller into the shaft of the Bracket Assembly so that the convex of the Roller face is toward the frame. 7. Clamp the harness of the Solenoid Assembly at five places on the Bracket Assembly. 8. Plug the connector (P/J 256M) of the Solenoid Assembly. 9. Mount the Rear Cover. 4-12 Service Manual