Lexmark W820 Service Manual - Page 224
Holder Assembly Removal, Remove the Cover-Jogging.
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
4025-Finisher Holder Assembly Removal Removal 1. Remove the Cover-Jogging. 2. Remove the Cover-Top, Front and Cover-Top, Rear. 3. Remove the Cover-Rear. 4. Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover. Note: In the following steps, the procedure on the front is the same as on the rear. Apply the same procedure to the rear. 5. Remove two screws that secure the lower Holder to the Bracket Front. 6. Disengage the Spring from the upper and lower Holder using radio pliers, and remove the Spring. 7. Remove two screws that secure the upper Holder to the Bracket. 8. Disengage the screw hole in the upper Holder from the hole in the Bracket Front, and push the upper Holder inside to remove it. 9. Disengage the screw hole in the lower Holder from the hole in the Bracket Front, and push the lower Holder inside to remove it. 10. Release the Belt from the upper and lower Pulley, and remove it. 4-116 Service Manual