Lexmark W820 Service Manual - Page 164

4025-Finisher Removal 1. Remove the Cover-Jogging. 2. Remove the Cover-Top, Front and Cover-Top, Rear. 3. Remove the Cover-Rear. 4. Remove the Kit Roll Pinch. 5. Remove the Sensor, Path. 6. Unplug the connector (CN 18) of the Harness Motor from the Clutch of the Puncher. 7. Unclamp the harness of the Puncher at two places on the Finisher. 8. Remove two screws from the Puncher that secure the Finisher. 9. Lift up the Puncher a little, and move it to the rear to remove it. Replacement 1. Insert the Puncher from the rear, and align it with the mounting position. 2. Secure the Puncher to the Finisher with two screws. 3. Clamp the harness of the Puncher at two places on the Finisher. 4. Plug the connector (CN 18) of the Harness Motor to the Clutch of the Puncher. 5. Mount the Sensor, Path. 6. Mount the Kit Roll Pinch. 7. Mount the Cover-Rear. 8. Mount the Cover-Top, Front and Cover-Top, Rear. 9. Mount the Cover-Jogging. 4-56 Service Manual