Lexmark W820 Service Manual - Page 135
Mount the Cover-Jogging.
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
4025-Finisher Replacement 1. Aligning the shaft in the center of the Cover-Front with the bearing in the center of the Cover-Open, Front, push them in to mount the Cover-Open, Front on the CoverFront. 2. Insert the Stud Cover into the hole at the bottom surface of the Cover-Open, Front, and secure the lower Cover-Open, Front. 3. Insert the Stud Cover into the hole at the top surface of the Cover-Open, Front, and secure the upper Cover-Open, Front. 4. Align the Cover-Front with the mounting position in the Finisher so that two bosses are engaged, and secure the Cover-Front together with the Stud Cover and CoverOpen, Front using four screws. 5. Secure the Cover-Open, Front to the Finisher with three screws. 6. Mount the Cover-Jogging. Removal and Replacement Procedures 4-27