Home » Lexmark Manuals » Laser Printers » Lexmark W820 » Manual Viewer

Lexmark W820 Service Manual - Page 49

Exit s, After the stapling operation is finished

UPC - 734646210508

Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

4025-Finisher Exit Sections • When the stapler job is not performed At the specified pulses after the Fin Exit Path Sensor detects the leading edge of the paper, the Exit Pinch Roll Guide lowers to nip the paper with the Exit Roller. Then the rotation of the Exit Roller delivers the paper on the Stacker Tray. After the trailing edge of the paper passes the Paper Exit Sensor, the Exit Pinch Roll Guide opens upward. • When the stapler job is performed After the stapling operation is finished, the bundle of paper stacked on the Compiler Tray is delivered on the Stacker Tray by the rotation of the Main Paddle and Exit Roller. Introduction 1-37

Section	Page
1. Introduction	13
2. Diagnostic Information	61
3. Diagnostic Aids	105
4. Removal and Replacement Procedures	109
5. Connectors	261
6. Preventative Maintenance	293
7. Parts Catalog	295

Match case Limit results 1 per page

Introduction

1-37

4025-Finisher

Exit Sections

•

When the stapler job is not performed

At the specified pulses after the Fin Exit Path Sensor detects the leading edge of the

paper, the Exit Pinch Roll Guide lowers to nip the paper with the Exit Roller. Then the

rotation of the Exit Roller delivers the paper on the Stacker Tray. After the trailing edge of

the paper passes the Paper Exit Sensor, the Exit Pinch Roll Guide opens upward

•

When the stapler job is performed

After the stapling operation is finished, the bundle of paper stacked on the Compiler Tray

is delivered on the Stacker Tray by the rotation of the Main Paddle and Exit Roller.