Lexmark W820 Service Manual - Page 157

4025-Finisher Kit Invert Guide Removal Removal 1. Remove the Cover-Jogging. 2. Remove the Cover-Top, Front and Cover-Top, Rear. 3. Remove the Cover-Rear. 4. Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover. 5. Remove the screw that secures the Invert Guide Assembly, Stud and Spring on the rear side, and remove the Stud and Spring while unhooking the Spring from the notch of the Finisher frame. WARNING: In the following steps, the Invert Guide Assembly is not secured. Take care not to drop or damage it. 6. Remove the screw that secures the Invert Guide Assembly, Spring and Screw on the front side, and remove the Stud and Spring while unhooking the Stud from the notch of the Finisher frame. 7. From the front side of the Finisher, remove the Invert Guide Assembly toward the front. Removal and Replacement Procedures 4-49