Lexmark W820 Service Manual - Page 134
Cover-Open, Cover-Front and Kit Stud Cover Removal
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
4025-Finisher Cover-Open, Cover-Front and Kit Stud Cover Removal Removal 1. Remove the Cover-Jogging. 2. Open the Cover-Open, Front, and remove three screws that secure the Cover-Front to the Finisher. 3. Remove four screws that secure the Cover-Front, and remove the Cover-Front together with the Stud Cover and Cover-Open, Front. 4. From the back of the Cover-Front, face the notch of the upper Stud Cover toward the back. 5. Pushing the latch of the upper Stud Cover, pull it off upward from the Cover-Open, Front and Cover-Front. 6. From the back of the Cover-Front, face the notch of the lower Stud Cover toward the back. 7. Pushing the latch of the lower Stud Cover, pull it off upward from the Cover-Open, Front and Cover-Front. 8. Push the bearing of the Cover-Open, Front out of the square hole in the center of the Cover-Front by lever action using a flat-tip screwdriver inserted between the bearing of the Cover-Open, Front and the shaft of the Cover-Front. 4-26 Service Manual