Netgear AC1750 User Manual - Page 84
Per Schedule, Always, Service Type, User Defined, Only This IP Address, IP Address Range
View all Netgear AC1750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
AC1750 Smart WiFi Router Model R6350 • Per Schedule. Use keyword blocking according to a schedule that you set. For more information, see Set Up a Schedule for Keyword Blocking and Outbound Firewall Rules on page 86. • Always. Use keyword blocking continuously. 7. Below the Service Table, click the Add button. The Block Services Setup page displays. 8. From the Service Type menu, select User Defined. 9. Specify a new outbound rule as described in the following table. Field Description Protocol Select the protocol (TCP or UDP) that is associated with the service or application. If you are unsure, select TCP/UDP. Starting Port Enter the start port for the service or application. Ending Port If the service or application uses a range of ports, enter the end port for the range. If the service or application uses a single port, repeat the port number that you entered in the Starting Port field. Service Type/User Defined Enter the name of the custom service or application. 10. Specify which devices on your LAN are affected by the rule, based on their IP addresses: • Only This IP Address. Enter the required address in the fields to apply the rule to a single device on your LAN. • IP Address Range. Enter the required addresses in the start and end fields to apply the rule to a range of devices. • All IP Addresses. All computers and devices on your LAN are covered by this rule. By default, the All IP Addresses radio button is selected. 11. Click the Add button. The new rule is added to the Service Table on the Block Services page. Control Access to the Internet 84 User Manual