Netgear FVS318G FVS318G User Manual - Page 31
Other PPPoE, Account Name, Domain Name., Idle Timeout., Austria PPTP, My IP Address. - disconnects
UPC - 606449064827
View all Netgear FVS318G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual 5. If you have installed login software such as WinPoET or Enternet, then your connection type is PPPoE. If your ISP uses PPPoE as a login protocol: Figure 2-8 a. Select Other (PPPoE). b. Configure the following fields: • Account Name. Valid account name for the PPPoE connection • Domain Name. Name of your ISP's domain or your domain name if your ISP has assigned one. In most cases, you may leave this field blank. • Idle Timeout. Select Keep Connected, to keep the connection always on. To logout after the connection is idle for a period of time, click Idle Time and in the timeout field enter the number of minutes to wait before disconnecting. 6. If your ISP is Austria Telecom or any other ISP that uses PPTP as a login protocol: a. Select Austria (PPTP). b. Configure the following fields: • Account Name (also known as Host Name or System Name). Enter the valid account name for the PPTP connection (usually your email name as assigned by your ISP). Some ISPs require entering your full email address here. • Domain Name. Your domain name or workgroup name assigned by your ISP, or your ISPs domain name. You may leave this field blank. • Idle Timeout. Check the Keep Connected radio button to keep the connection always on. To logout after the connection is idle for a period of time, click Idle Time and enter the number of minutes to wait before disconnecting in the timeout field. This is useful if your ISP charges you based on the amount of time you have logged in. • My IP Address. IP address assigned by the ISP to make the connection with the ISP server. Connecting the FVS318G to the Internet 2-9 1.1 November, 2009