Netgear FVS318G FVS318G User Manual - Page 40
Configuring the LAN Setup Options, DHCP Relay, DNS Proxy - setup vpn
UPC - 606449064827
View all Netgear FVS318G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual • An IP Address from the range you have defined. • Subnet Mask. • Gateway IP Address (the firewall's LAN IP address). • Primary DNS Server (the firewall's LAN IP address). • WINS Server (if you entered a WINS server address in the DHCP Setup menu). • Lease Time (date obtained and duration of lease). DHCP Relay options allow you to make the firewall a dhcp relay agent. The DHCP Relay Agent makes it possible for DHCP broadcast messages to be sent over routers that do not support forwarding of these types of messages. The DHCP Relay Agent is therefore the routing protocol that enables DHCP clients to obtain IP addresses from a DHCP server on a remote subnet, or which is not located on the local subnet. If you have no configured DHCP Relay Agent, your clients would only be able to obtain IP addresses from the DHCP server which is on the same subnet. To enable clients to obtain IP addresses from a DHCP server on a remote subnet, you have to configure the DHCP Relay Agent on the subnet that contains the remote clients, so that it can relay DHCP broadcast messages to your DHCP server. When the DNS Proxy option is enabled, the router will act as a proxy for all DNS requests and communicate with the ISP's DNS servers (as configured in the WAN settings page). All DHCP clients will receive the Primary/Secondary DNS IP along with the IP where the DNS Proxy is running, i.e. the box's LAN IP. When disabled, all DHCP clients will receive the DNS IP addresses of the ISP excluding the DNS Proxy IP address. Configuring the LAN Setup Options The LAN Setup menu allows configuration of LAN IP services such as DHCP and allows you to configure a secondary or "multi-home" LAN IP setup in the LAN. The default values are suitable for most users and situations. Note: If you enable the DHCP Relay feature, you will not use the FVS318G as a DHCP server but rather as a DHCP relay agent for a DHCP server somewhere else on your network. 3-2 LAN Configuration 1.1 November, 2009