Netgear FVS318G FVS318G User Manual - Page 80

Security > Port Triggering, Port Triggering, Enable, Protocol, Outgoing Trigger Port Range

Get Netgear FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router PDF manuals and user guides
UPC - 606449064827
View all Netgear FVS318G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual Note these restrictions with Port Triggering: • Only one PC can use a port triggering application at any time. • After a PC has finished using a port triggering application, there is a time-out period before the application can be used by another PC. This is required because the VPN firewall router cannot be sure when the application has terminated. Note: For additional ways of allowing inbound traffic, see "Inbound Rules (Port Forwarding)" on page 4-5. To add a port triggering rule: 1. Select Security > Port Triggering to display the Port Triggering tab page. Figure 4-13 2. Enter a user-defined name for this rule in the Name field. 3. From the Enable pull-down menu, indicate if the rule is enabled or disabled. 4. From the Protocol pull-down menu, choose either TCP or UDP transport protocol. 5. In the Outgoing (Trigger) Port Range fields: a. Enter the Start Port range (1 - 65534). b. Enter the End Port range (1 - 65534). 4-28 Firewall Protection and Content Filtering 1.1 November, 2009

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
4-28
Firewall Protection and Content Filtering
1.1 November, 2009
Note these restrictions with Port Triggering:
•
Only one PC can use a port triggering application at any time.
•
After a PC has finished using a port triggering application, there is a time-out period before the
application can be used by another PC. This is required because the VPN firewall router
cannot be sure when the application has terminated.
To add a port triggering rule:
1.
Select
Security > Port Triggering
to display the
Port Triggering
tab page.
2.
Enter a user-defined name for this rule in the
Name
field.
3.
From the
Enable
pull-down menu, indicate if the rule is enabled or disabled.
4.
From the
Protocol
pull-down menu, choose either TCP or UDP transport protocol.
5.
In the
Outgoing (Trigger) Port Range
fields:
a.
Enter the
Start Port
range (1 - 65534).
b.
Enter the
End Port
range (1 - 65534).
Note:
For additional ways of allowing inbound traffic, see
“Inbound Rules (Port
Forwarding)” on page 4-5
.
Figure 4-13