Oki PT330 PT330/331 LAN Card Manual - Page 80
CONFIGURATION PARAMETERS ON THE WEB\r BROWSER, Print server, General, TCP/IP
View all Oki PT330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
CONFIGURATION PARAMETERS ON THE WEB BROWSER Print server General Configure the LAN card for the network. Item Description Factory default Change Root Password Specify an administrator password for the LAN card using an ASCII character string. (up to 7 characters.) This password is used as the authentication password for configuration using AdminManager or a Web browser. LAN Interface Specify the physical network type. Normally, select AUTO. If the LINK light on the hub to which the LAN card is connected does not go on when the LAN card is switched on, change this setting to the network type of the connected hub. Printer Name Specify the printer name. (up to 31 characters.) None AUTO None TCP/IP Configure the LAN card for the IP address and other TCP/IP protocol parameters. Item Description Factory default DHCP RARP IP Address Subnet Mask Default Gateway Use FTP/LPD Banner IPv6 Function Specify whether to ENABLE or DISABLE the DHCP protocol. Do not change this setting because this LAN card does not support RARP. Specify the IP address of the LAN card using the decimal formatofxxx.xxx.xxx.xxx. Specify the subnet mask of the LAN card using the decimal format of xxx.xxx.xxx.xxx. The specification of 0.0.0.0 is invalid and the default subnet mask corresponding to the specified IP address is assumed. Specify the default gateway of the LAN card using the decimal format of xxx.xxx.xxx.xxx. The specification of 0.0.0.0 is invalid. Specify whether to print (ENABLE) or not print (DISABLE) a banner page during FTP or LPD printing. Specify whether to ENABLE or DISABLE the IPv6 Function. ENABLE DISABLE 0.0.0.0 0.0.0.0 0.0.0.0 NO DISABLE 4-24