Ricoh Pro 8120s User Guide - Page 114
Recommended Paper Sizes and Types., misfeed, or if it weighs between 52.3-63.0 g/m
View all Ricoh Pro 8120s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
8. Adding Paper and Toner • The maximum number of sheets you can load at the same time depends on paper type. Do not stack paper over the limit mark. For the maximum number of sheets you can load, see page 118 "Recommended Paper Sizes and Types". • Check the paper edges are aligned at the left side. • When loading a low number of sheets, be sure not to squeeze the side fences in too tightly. If the side fences are squeezed too tightly against the paper, the edges may crease, the paper may misfeed, or if it weighs between 52.3-63.0 g/m2 (14.0-16.9 lb. Bond), it may wrinkle. 1. Set the side fences to the paper size, and then square the paper and load it print side up. Do not stack paper over the limit mark. 2. Set the end fence. 1 CWW309 2 CWW311 1. End fence 2. Extender To remove the end fence, slide it to the right by pressing the stopper down. 106