Ricoh Pro 8120s User Guide - Page 164
paper, see Loading Paper, Specifications and Adding Paper
View all Ricoh Pro 8120s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
9. Troubleshooting The following table explains problems that cause the indicator lamp for the [Check Status] key to light or flash. Problems Documents and reports do not print out. Documents and reports do not print out. An error has occurred. The machine is unable to connect to the network. Causes Solutions The paper output tray is full. Remove the prints from the tray. There is no paper left. A function which has the status "Error Occurred" in the [Check Status] screen is defective. A network error has occurred. Load paper. For details about loading paper, see "Loading Paper", Paper Specifications and Adding Paper . Press [Check] in the function which the error has occurred. Then check the displayed message, and take appropriate action. For details about error messages and their solutions, see "When Messages Appear", Troubleshooting . You can use other functions normally. • Check that the machine is correctly connected to the network, and that the machine is correctly set. For details about how to connect the network, see "Connecting the Machine", Connecting the Machine/ System Settings . • For details about connecting to the network, contact your administrator. • If the indicator lamp is still lit even after trying to solve the problem as described here, contact your service representative. 156