Ricoh Pro 8120s User Guide - Page 213
Using telnet, Connecting, the Machine/ System
View all Ricoh Pro 8120s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Messages Displayed When Using the Scanner Function Messages "Cannot find "XXX" scanner used for the previous scan. "YYY" will be used instead." ("XXX" and "YYY" indicate scanner names.) "Cannot find "XXX" scanner used for the previous scan. "YYY" will be used instead." ("XXX" and "YYY" indicate scanner names.) "Communication error has occurred on the network." "Scanner is not available. Check the scanner connection status." Causes The main power of the previously used scanner is not set to "On". Solutions Check whether the main power of the scanner used for the previous scan is turned on. The machine is not connected to the network correctly. • Check that the previously used scanner is connected to the network correctly. • Cancel the personal firewall of the client computer. For details about firewall, see Windows Help. • Use an application such as telnet to make sure SNMPv1 or SNMPv2 is set as the machine's protocol. For details about how to check this, see "Remote Maintenance Using telnet", Connecting the Machine/ System Settings . • Select the scanner used for the previous scan. A communication error has occurred on the network. Check whether the client computer can use the TCP/IP protocol. The machine's power is off. Turn on the power. 205