Sony PDWHD1500 User Manual (PDW-HD1500 Operation Manual for Firmware Version 1 - Page 113
ARIB CB ARIB Color Bars, PLSBR Pulse and Bar
View all Sony PDWHD1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Menu items in the 700s, relating to video control Item number Item name 710 INTERNAL VIDEO SIGNAL GENERATOR Settings Select the test signal to be output from the internal test signal generator. When V INPUT on the P1 VIDEO page of the function menu is set to "SG", the internal test signal generator operates to output the selected test signal. This signal can also be recorded. CB75 (75% Color Bars): 75% color bar signal CB100 (100% Color Bars): 100% color bar signal MLTBS (Multi Burst): Multi-burst signal 10STEP (10 steps): 10-step signal PLSBR (Pulse and Bar): Pulse and bar signal RAMP (Ramp): Ramp signal BLACK (Black): Black signal ARIB CB (ARIB Color Bars): ARIB color bar signal, modify width, 100% Note ARIB CB cannot be specified when SD recording is selected. If ARIB CB is selected, the selection is changed to CB75 (75% Color Bars). 713 VIDEO SETUP REFERENCE Set the video setup amount to be added to the composite output signal (in LEVEL 59.94i/59.94P/29.97P mode only). Sub-item OUTPUT LEVEL In 59.94i/59.94P/ Add the setup level selected by this item to the output signal. 29.97P mode (UC) 0.0%, 7.5% In 59.94i/59.94P/ Add the setup level selected by this item to the output signal. 29.97P mode (J) 0.0%, 7.5% 715 VIDEO GAIN CONTROL Adjust the video output level. -2048 to 0 to 848 716 CHROMA GAIN CONTROL Adjust the chroma output level. -2048 to 0 to 848 717 CHROMA PHASE CONTROL Adjust the chroma phase. -128 to 0 to 127 718 SETUP LEVEL (59.94i/59.94P/ Adjust the setup level (black level). 29.97P mode)/BLACK LEVEL (50i/ -272 to 0 to 272 50P/25P mode) 719 SYSTEM PHASE SYNC Adjust the output signal sync phase. -128 to 0 to 127 720 SYSTEM PHASE SC Adjust the output signal subcarrier phase. 0 to 511 723 INPUT VIDEO BLANKING a) Switch blanking on or off for lines in the vertical blanking interval of input video signals. Lines can be specified individually. Y/C signals and odd/ Sub-Item even fields are blanked simultaneously. Blanking in recorded signals is carried out according to these settings. 1 ALL LINE - - -: Specify the blanking for each line separately. blnk (blank): Regardless of the settings of other sub-items, blank all lines which can be specified in this menu item. thru (throu): Regardless of the settings of other sub-items, switch blanking off for all lines which can be specified in this menu item. 2...10 LINE 12 In 59.94i/59.94P/ Specify blanking for lines 12 to 20. ... 29.97P blnk (blank): Switch blanking on. LINE 20 mode thru (throu): Switch blanking off. 2...15 LINE 9 In 50i/50P/25P ... mode LINE 22 Specify blanking for lines 9, 322 to 22, and 335. blnk (blank): Switch blanking on. thru (throu): Switch blanking off. Chapter 7 Menus Setup Menu 113