Sony PDWHD1500 User Manual (PDW-HD1500 Operation Manual for Firmware Version 1 - Page 141

Audio 24 bits, 48 kHz, 8 channels Proxy audio A-law 8 bits, 8 kHz, 8 channels Recording/playback times PFD23A discs Approx. 43 minutes PFD50DLA discs Approx. 95 minutes Note The recording and playback times listed above are approximate. Maximum recording times may vary depending on recording conditions. Search speed Jog mode -1 to +1 times normal speed Variable-speed mode -2 to +2 times normal speed Shuttle mode -20 to +20 times normal speed Fast forward mode +35 times normal speed Fast reverse mode -35 times normal speed Video performance Sampling frequency Y: 74.25 MHz, R-Y/B-Y: 37.125 MHz Quantization 8 bits/sample Compression MPEG-2 422P@HL Composite output Frequency response 0.5 to 5.75 MHz+0.5/-2.0 dB S/N (Y) 53 dB or more Y/C delay ±20 ns or less K-factor (K2T) 1.0% or less Processor adjustment range Video level -∞ to +3 dB Chroma level -∞ to +3 dB Set up/black level ±30 IRE/±210 mV Chroma phase ±30° System phase SYNC: ±15 µs SC: 0 to +400 ns Audio performance Sampling frequency 48 kHz Quantization 24 bits Headroom -20/-18/-16/-12 dB (selectable) Frequency response 20 Hz to 20 kHz +0.5/-1.0 dB (0 dB at 1 kHz) Dynamic range 90 dB or more Distortion 0.05% or less (at 1 kHz) Input connectors Digital video inputs SD/HDSDI INPUT BNC type (×1), complying with SMPTE259M (SD)/SMPTE-292M (HD) (i.LINK) S400 6-pin type (×1), complying with IEEE 1394 Analog video inputs REF.VIDEO INPUT BNC type (×2, loop-through), HD Tri-level sync (0.6 Vp-p/75 Ω/sync negative), SD black burst, or SD composite sync (0.286 Vp-p/75 Ω/ sync negative) Analog audio inputs ANALOG AUDIO INPUT 1, 2 XLR 3-pin, female (×2), +4 dBu, high impedance, balanced Digital audio inputs DIGITAL AUDIO (AES/EBU) IN 1/2, 3/4 BNC type (×2), 1/2ch, 3/4ch complying with AES-3id-1995 Timecode input TIME CODE IN BNC type (×1), SMPTE timecode, 0.5 to 18 Vp-p, 10 kΩ, unbalanced Output connectors Digital video outputs HDSDI OUTPUT 1, 2(SUPER) BNC type (×2), complying with SMPTE292M SDSDI OUTPUT 1, 2(SUPER) BNC type (×2), complying with SMPTE259M Analog video outputs COMPOSITE OUTPUT 1, 2(SUPER) BNC type (×2), 1.0 Vp-p, 75 Ω, sync negative, complying with SMPTE170M Analog audio outputs ANALOG AUDIO OUTPUT 1, 2 XLR 3-pin, male (×2), +4 dBu, 600 Ω, low impedance, balanced AUDIO MONITOR XLR 3-pin, male (×2), +4 dBu, 600 Ω, low impedance, balanced PHONES Stereo phone jack (×1), -∞ to -13 dBu, 8 Ω, unbalanced Appendix 141 Specifications