Sony PDWHD1500 User Manual (PDW-HD1500 Operation Manual for Firmware Version 1 - Page 75

Chapter 5 Operations in GUI Screens the location where the currently selected sub clips will be inserted. To display the total duration after addition of the selected clips Press the SHIFT button. 5 In the Scene Selection window, move the I cursor to the location where you want to insert the clip. (The existing thumbnails arrange themselves to the left and right of the I cursor.) 6 Press the PUSH SET(S.SEL) knob. The sub clips are added at the I cursor position, and you return to the clip list thumbnail screen. You can check the results of the addition in that screen. 7 Repeat steps 1 to 6 as required to add more clips. 8 Save the clip list (see page 77). In step 1, you can also perform a shortcut operation by pressing the PUSH SET(S.SEL) knob with the SHIFT button held down. To add clips from the clip playback screen (quick insertion) This method allows you to decide the range to use and add that range as a sub clip while viewing the video in the clip playback screen. It does not use GUI screens. You can do this during recording, playback (including pauses), and searches. 1 Find the point that you want to make the start point of the sub clip, and then press the PUSH SET(S.SEL) knob with the B/IN button held down. An In point is set and the IN indicator lights. 2 Find the point that you want to make the end point of the sub clip, and then press the PUSH SET(S.SEL) knob with the b/OUT button held down. An Out point is set and the OUT indicator lights. (This determines the range of the sub clip to be added.) To check the timecode of the In point or Out point Press the B/IN button or the b/OUT button. To cue up the In point or Out point Press the PREV button or the NEXT button with the B/IN button or b/OUT button held down. To check the duration (time from In point to Out point) Press the B/IN and b/OUT buttons at the same time. To delete the In point or Out point Press the RESET/RETURN button with the B/IN or b/OUT button held down. 3 With the SHIFT button held down, press the PUSH SET(S.SEL) knob. A sub clip with the range specified in steps 1 and 2 is added to the end of the clip list. When you specify a range that spans several clips Sub clips are generated for each of the clips in the range. To check the newly added sub clips You can check the newly added sub clips by displaying the clip list thumbnail screen. 4 Repeat steps 1 to 3 as required to add more sub clips. 5 Save the clip list (see page 77). To reorder sub clips See page 63 for more information about thumbnail screen operations. 1 In the clip list thumbnail screen, select the thumbnails of the sub clips that you want to move (multiple selections possible). 2 Display the Thumbnail Menu. 3 Select Move Sub Clips, and then press the PUSH SET(S.SEL) knob. The Clip List (Move) screen appears. Clip List (Move) 006 001/034 TC 00:00:00:00 TC 00:00:21:27 TC 00:04:06:00 TC 00:04:13:14 TC 00:04:35:12 TC 00:04:57:10 TC 00:05:19:08 TC 00:05:41:05 TC 00:06:03:03 TC 00:06:25:00 TC 00:06:46:27 TC 00:07:08:25 DATE&TIME 08 AUG 2007 11:50 TOTAL DUR 00:13:48:24 4 Move the I cursor to the point where you want to move the selected thumbnails. 5 Press the PUSH SET(S.SEL) knob. The sub clips are moved to the I cursor position. 6 Repeat steps 1 to 5 as required. 75 Scene Selection (Clip List Editing)