Sony PDWHD1500 User Manual (PDW-HD1500 Operation Manual for Firmware Version 1 - Page 127
Setting clip names, Examples of automatically generated clip names
View all Sony PDWHD1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
3 In the above example, sp indicates a space and 3 indicates a carriage return. Notes • When creating a file, write each line as a single statement, inserting carriage returns only at the indicated carriage return locations, and inserting no unspecified spaces. • If the UTF-8 format string is longer than 52 characters, the ASCII format string is used as the clip name string. Setting clip names 1 Load a planning metadata file containing clip names into the unit's memory (see page 80). 2 Carry out steps 2 to 5 of to set the "To assign clip names on this unit" (page 88). 3 Turn the PUSH SET(S.SEL) knob to display "PLAN", and then press the PUSH SET(S.SEL) knob. Each time that you start recording, the unit automatically creates clip names using the names specified in the planning metadata file. An underscore (_) and a three-digit serial number (001 to 999) is appended to each clip name. Examples of automatically generated clip names Clip names displayed in the video monitor screenr: Typhoon_001, Typhoon_002, ... The actually recorded clip names: Typhoon_Strikes_Tokyo_001, Typhoon_Strikes_Tokyo_002, ... 1) 1) When display of the ASCII format clip name has been selected (see page 81). Notes • The serial numbers return to 001 on the next recording operation if you reach number 999. • Serial numbers are not reset when you power the unit off or exchange discs (newly generated numbers are continuous on the old ones). • If the ASCII format clip name string is longer than 14 characters, it is displayed in the viewfinder as the first 8 characters + x (abbreviated) + the last 4 characters, for a total of 13 characters. Overview 127 Chapter 8 Planning Metadata