Sony PDWHD1500 User Manual (PDW-HD1500 Operation Manual for Firmware Version 1 - Page 25

DIGITAL AUDIO AES/EBU OUT digital audio, AUDIO MONITOR R, L connectors XLR 3-pin

Get Sony PDWHD1500 PDF manuals and user guides View all Sony PDWHD1500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Chapter 2 Names and Functions of Parts 3, and whether the signal input to connector 2 is assigned to audio channel 2 or 4. You can set the reference input level with the maintenance menu item M37: AUDIO CONFIG (see page 120). (Factory default setting: +4 dB) Microphone settings If you have connected a microphone to this unit, you can set input level, AGC, and limiter values for the microphone with setup menu items 834, 839, 840, and 841 (see page 116). Note An unpleasant sound may be output if you have connected a microphone to the ANALOG AUDIO INPUT 1 or 2 connector and power the microphone on with the input level too high. Check the input level setting before connecting a microphone. b ANALOG AUDIO OUTPUT 1, 2 connectors (XLR 3-pin, male) These output analog audio signals. When the unit is shipped from the factory, the 1 connector is set to audio channel 1, and the 2 connector is set to audio channel 2. You can change these settings with setup menu item 824 ANALOG LINE OUTPUT SELECT (see page 115). You can set the output level with the maintenance menu item M37: AUDIO CONFIG (see page 120). (Factory default setting: +4 dB) Non-audio signals are muted. c AUDIO MONITOR R, L connectors (XLR 3-pin, male) This outputs an audio signal for monitoring. The monitored channel is selected with MONITR L and MONITR R on page P2 AUDIO of the function menu. See "Basic Operations of the Function Menu" (page 42) for more information. 3 Digital audio signal input/output section 1 DIGITAL AUDIO (AES/EBU) IN 1/2, 3/4 connectors DIGITAL AUDIO (AES/EBU) IN 1/2 3/4 OUT 1/2 3/4 2 DIGITAL AUDIO (AES/EBU) OUT 1/2, 3/4 connectors a DIGITAL AUDIO (AES/EBU) IN (digital audio input) 1/2, 3/4 connectors (BNC type) These input AES/EBU format digital audio signals. The left connector (1/2) corresponds to audio channels 1 and 2, and the right connector (3/4) corresponds to audio channels 3 and 4. b DIGITAL AUDIO (AES/EBU) OUT (digital audio output) 1/2, 3/4 connectors (BNC type) These output AES/EBU format digital audio signals. When the unit is shipped from the factory, the 1/2 connector is set to audio channel 1/2, and the 3/4 connector is set to audio channel 3/4. You can change these settings with setup menu item 827 AES/EBU AUDIO OUTPUT SELECT (see page 115). To treat the input and output signals of these connectors as non-audio signals, set the maintenance menu item M37: AUDIO CONFIG >M372: NON-AUDIO INPUT (recording) (see page 120) and setup menu item 823 NONAUDIO FLAG PB (playback). 4 Timecode input/output section 1 TIME CODE IN connector 2 TIME CODE OUT connector TIME CODE IN OUT a TIME CODE IN connector (BNC type) This inputs an SMPTE timecode generated by an external device. b TIME CODE OUT connector (BNC type) This outputs the following timecode, depending on the operating state of this unit. During playback: Playback timecode During recording: The timecode from the internal timecode generator or the timecode input to the TIME CODE IN connector When setup menu item 611 TC OUTPUT PHASE IN EE MODE is set to "muting", no timecode is output. 25 Rear Panel

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
25
Rear Panel
Chapter 2
Names and Functions of Parts
3, and whether the signal input to connector 2 is assigned
to audio channel 2 or 4.
You can set the reference input level with the maintenance
menu item
M37: AUDIO CONFIG
(see page 120)
.
(Factory default setting: +4 dB)
Microphone settings
If you have connected a microphone to this unit, you can
set input level, AGC, and limiter values for the
microphone with setup menu items 834, 839, 840, and 841
(see page 116)
.
An unpleasant sound may be output if you have connected
a microphone to the ANALOG AUDIO INPUT 1 or 2
connector and power the microphone on with the input
level too high. Check the input level setting before
connecting a microphone.
b
ANALOG AUDIO OUTPUT 1, 2 connectors (XLR
3-pin, male)
These output analog audio signals.
When the unit is shipped from the factory, the 1 connector
is set to audio channel 1, and the 2 connector is set to audio
channel 2. You can change these settings with setup menu
item 824 ANALOG LINE OUTPUT SELECT
(see
page 115)
.
You can set the output level with the maintenance menu
item M37: AUDIO CONFIG
(see page 120)
. (Factory
default setting: +4 dB)
Non-audio signals are muted.
c
AUDIO MONITOR R, L connectors (XLR 3-pin,
male)
This outputs an audio signal for monitoring.
The monitored channel is selected with MONITR L and
MONITR R on page P2 AUDIO of the function menu.
See “Basic Operations of the Function Menu” (page 42)
for more information.
3
Digital audio signal input/output section
a
DIGITAL AUDIO (AES/EBU) IN (digital audio
input) 1/2, 3/4 connectors (BNC type)
These input AES/EBU format digital audio signals. The
left connector (1/2) corresponds to audio channels 1 and 2,
and the right connector (3/4) corresponds to audio
channels 3 and 4.
b
DIGITAL AUDIO (AES/EBU) OUT (digital audio
output) 1/2, 3/4 connectors (BNC type)
These output AES/EBU format digital audio signals.
When the unit is shipped from the factory, the 1/2
connector is set to audio channel 1/2, and the 3/4 connector
is set to audio channel 3/4. You can change these settings
with setup menu item 827 AES/EBU AUDIO OUTPUT
SELECT
(see page 115)
.
To treat the input and output signals of these connectors as
non-audio signals, set the maintenance menu item M37:
AUDIO CONFIG >M372: NON-AUDIO INPUT
(recording)
(see page 120)
and setup menu item 823 NON-
AUDIO FLAG PB (playback).
4
Timecode input/output section
a
TIME CODE IN connector (BNC type)
This inputs an SMPTE timecode generated by an external
device.
b
TIME CODE OUT connector (BNC type)
This outputs the following timecode, depending on the
operating state of this unit.
During playback:
Playback timecode
During recording:
The timecode from the internal
timecode generator or the timecode input to the TIME
CODE IN connector
When setup menu item 611 TC OUTPUT PHASE IN EE
MODE is set to “muting”, no timecode is output.
Note
1/2
3/4
IN
1/2
3/4
OUT
DIGITAL AUDIO (AES/EBU)
1
DIGITAL AUDIO (AES/EBU) IN 1/2, 3/4
connectors
2
DIGITAL AUDIO (AES/EBU) OUT 1/2, 3/4
connectors
IN
OUT
TIME CODE
1
TIME CODE IN connector
2
TIME CODE OUT
connector