Dell 2130 Color Laser User Guide - Page 153

Power Saver Timer Mode 2 Sets the time for transition to Power Saver Mode 2. Control Panel Tone Specifies whether to enable the tone that is emitted when the operator panel input is correct. Invalid Key Tone Specifies whether to enable the tone that is emitted when the operator panel input is incorrect. Machine Ready Tone Specifies whether to enable the tone that is emitted when the printer becomes ready. Job Completed Tone Specifies whether to enable the tone that is emitted when a print job is complete. Fault Tone Specifies whether to enable the tone that is emitted when a job ends abnormally. Alert Tone Specifies whether to enable the tone that is emitted when a problem occurs. Out of Paper Alert Tone Specifies whether to enable the tone that is emitted when the printer runs out of paper. Low Toner Alert Tone Specifies whether to enable the tone that is emitted when toner or some other consumable is low. Base Tone Specifies whether to enable the tone that is emitted when the operator panel screen returns to the default by scrolling the loop menu. Fault Time-Out Specifies in seconds the amount of time the printer should cancel for a job stops abnormally. The print job is cancelled if the timeout time is exceeded. Time-Out Specifies in seconds the amount of time the printer should wait for data to arrive from the computer. The print job is cancelled if the time-out time is exceeded. Panel Language Sets the language to be used on the operator panel. Auto Log Print Specifies whether to automatically print a log of completed jobs after every 20 jobs. Print ID Specifies where to print the user ID on the output paper. Print Text Specifies whether the printer outputs PDL data, which is not supported by the printer, as text when the printer receives it. Banner Sheet Insert Position Specifies where to insert a banner sheet. Banner Sheet Specify Tray*1 Specifies which input tray to use to insert a banner sheet. RAM Disk Specifies whether to allocate RAM for the file system for the Secure Print and Proof Print features. This item is only available when the 512 MB, or higher, optional memory is installed. Odd Page 2 Sided*2 Specifies how the odd last page is printed when using duplex printing. Substitute Tray Specifies whether or not to use another size paper when the paper that is loaded in the specified tray does not match the paper size settings for the current job. mm / inch Specifies the measurement unit to be used on the operator panel screen as either mm or inches. *1 This item is only available when the optional 250-sheet feeder is installed. *2 This item is only available when the optional duplexer is installed. USB Settings Purpose: To change printer settings affecting a USB port. Values: Port Status Specifies whether to enable the USB interface. PCL Settings Purpose: To change the printer settings that only affect jobs using the PCL emulation printer language. Values: Paper Tray Paper Size Custom Size - Y Custom Size - X Orientation 2 Sided Font Symbol Set Font Size Font Pitch Form Line Quantity Specifies the input tray. Specifies the paper size. Specifies the length of custom size paper. Specifies the width of custom size paper. Specifies how text and graphics are oriented on the page. Sets duplexing as the default for all print jobs. This item is only available when the optional duplexer is installed. Specifies the font from the list of registered fonts. Specifies a symbol set for the specified font. Specifies the font size for scalable typographic fonts. Specifies the font pitch for scalable monospaced fonts. Specifies the number of characters in a line. Sets the number of copies to print.