Dell 2130 Color Laser User Guide - Page 25
TCP/IP Settings, Network Settings
View all Dell 2130 Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Tray 2 Paper Size*2 Letter (8.5 x 11") Folio (8.5 x 13") Specifies the size of paper loaded in the optional 250-sheet feeder. Legal (8.5 x 14") Executive (7.25 x 10.5") Display Popup Off On* Does not display a popup message that prompts to set paper size and type when paper is loaded in the standard 250-sheet tray and optional 250-sheet feeder. Displays a popup message that prompts to set paper size and type when paper is loaded in the standard 250-sheet tray and optional 250-sheet feeder. Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes. Restart printer to apply new settings Press the Restart printer to apply new settings button to apply the changes. *1 "S2" means the print side 2 of the paper. *2 This item is only available when the optional 250-sheet feeder is installed. TCP/IP Settings Purpose: To configure TCP/IP settings. Values: Automatically sets the IP address. IP Address Mode AutoIP* DHCP BOOTP A random value in the range of 169.254.1.0 to 169.254.254.255 that is not currently in use on the network is set as the IP address. The subnet mask is set as 255.255.0.0. Sets the IP address using DHCP. Sets the IP address using BOOTP. RARP Sets the IP address using RARP. Manually Set Manually sets the IP address. IP Address*1 Manually sets the IP address allocated to the printer. It is allocated to the printer using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. Subnet Mask*2 Manually sets the subnet mask. It is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 255. Gateway Address*1 Manually sets the gateway address. It is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes. Restart printer to apply new settings Press the Restart printer to apply new settings button to apply the changes. *1 127 and any value in the range of 224 to 254 cannot be specified for the first octet of a gateway address. *2 255.255.255.255 cannot be specified as the subnet mask. Network Settings Purpose: To display the server settings of the Dell Printer Configuration Web Tool. NOTE: When the printer is connected to the local port, this setting cannot be displayed. Values: Display Displays the server settings of the Dell Printer Configuration Web Tool. Off Disable to display the server settings of the Dell Printer Configuration Web Tool. Display of EWS On* Enable to display the server settings of the Dell Printer Configuration Web Tool. Diagnosis