Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 1038

Command Modes Command History vlan vlan-id • For a Port Channel interface, enter the keywords portchannel followed by a number. The E-Series range is 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a SONET interface, enter the keyword sonet followed by the slot/ port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display the MAC address assigned to the VLAN. The range is 1 to 4094. • EXEC • EXEC Privilege Version 8.5.1.0 Version 8.3.7.0 pre-Version 6.2.1.1 Added support for 4-port 40G line cards on ExaScale. Introduced on the S4810. Introduced on the E-Series. show cam maccheck linecard Display the results of the BCMI2 check command. C-Series Syntax Parameters show cam maccheck linecard slot port-set port-pipe linecard slot port-set port-pipe (REQUIRED) Enter the keyword linecard followed by a slot number to select the linecard for which to gather information. The C300 range is 0 to 7 and the C150 range is 0 to 4. (REQUIRED) Enter the keywords port-set followed by a Port-Pipe number to select the Port-Pipe for which to gather information. The range is 0 or 1. Command Modes • EXEC • EXEC Privilege Command History Version 7.6.1.0 Introduced on the C-Series. Usage Information Use this command to check various flags associated with each MAC address in the CAM. The Example below shows information for two MAC addresses. The second entry is for MAC address 00:00:a0:00:00:00 (leading 0s are not shown), which is shown as learned on VLAN ID 1038