Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 158

show linecard Display the line card(s) status. C-Series, E-Series Syntax Parameters show linecard [number [brief] | all] number all brief (OPTIONAL) Enter a slot number to view information on the line card in that slot. For the C-Series, the range is 0 to 7. For the E-Series, the ange is 0 to 13 on the E1200, 0 to 6 on the E600, and 0 to 5 on the E300. (OPTIONAL) Enter the keyword all to view a table with information on all present line cards (OPTIONAL) Enter the keyword brief to view an abbreviated list of line card information. Command Modes • EXEC • EXEC Privilege Command History Version 8.1.1.0 Version 7.5.1.0 E-Series Introduced on the E-Series ExaScale. Introduced on the C-Series. Original command. Usage Information show linecard output Field Line card Status Next Boot Required Type Current Type Hardware Rev Num Ports Up Time FTOS Version Description Displays the line card slot number (only listed in the show linecard all command output). Displays the line card's status. Displays whether the line card is to be brought online at the next system reload. Displays the line card type configured for the slot. The Required Type and Current Type must match. If they do not match, use the linecard command to reconfigure the line card type. Displays the line card type installed in the slot. The Required Type and Current Type must match. If they do not match, use the linecard command to reconfigure the line card type. Displays the chip set revision. Displays the number of ports in the line card. Displays the number of hours and minutes the card is online. Displays the operating software version. 158