Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 1527

upgrade system stack-unit (S-Series stack member) Copy the boot image or FTOS from the management unit to one or more stack members. S-Series, S4810 Syntax Parameters upgrade {boot | system} stack-unit {all | 0-11 | A | B} boot system all 0-11 A B Enter the keyword boot to copy the boot image from the management unit to the designated stack members. Enter the keyword system to copy the FTOS image from the management unit to the designated stack members. Enter the keyword all to copy the designated image to all stack members. Enter the unit ID of the stack member to which to copy the designated image. Enter the keyword A to upgrade all stacked units in System A (S4810 only). Enter the keyword B to upgrade all stacked units in System B (S4810 only). Defaults Command Modes Command History none EXEC Version 7.7.1.0 Introduced on the S-Series. Usage Information Related Commands To reboot using the new image, use the upgrade boot system stack-unit command. • reload - reboots FTOS. • reset stack-unit - resets the designated S-Series stack member. • show system (S-Series) - displays the status of all stack members or a specific member. • show version - displays the current FTOS version information on the system. • upgrade (S-Series management unit) - upgrades the bootflash image or system image of the S-Series management unit. 1527