Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 797

Defaults Command Modes Command History Example Related Commands none EXEC Version 8.3.11.1 Version 8.5.1.0 Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 Introduced on the Z9000. Added support for 4-port 40G line cards on ExaScale. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced FTOS#show interfaces dampening Interface Supp Flaps Penalty Half-Life Reuse Suppress Max-Sup State Gi 3/2 Up 0 0 20 800 4500 120 Gi 3/10 Up 0 0 5 750 2500 20 FTOS# dampening - configures dampening on an interface. show interfaces - displays information on a specific physical interface or virtual interface. show interfaces configured - displays any interface with a non-default configuration. show interfaces debounce Display information on interfaces with the debounce timer configured. E-Series Syntax Parameters show interfaces debounce interface interface (Optional) Enter one of the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Command Modes Command History • EXEC • EXEC Privilege Version 8.5.1.0 Version 8.2.1.0 Added support for 4-port 40G line cards on ExaScale. Introduced on the E-Series ExaScale. 797