Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 1331

service-policy output Apply an output policy map to the selected interface. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax service-policy output policy-map-name To remove the output policy map from the interface, use the no service-policy output policy-map-name command. Parameters policy-map-name Enter the name for the policy map in character format (16 characters maximum). You can identify an existing policy map or name one that does not yet exist. Defaults Command Modes Command History none INTERFACE Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 pre-Version 6.1.1.1 Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. Introduced on the E-Series. Usage Information Related Commands A single policy-map can be attached to one or more interfaces to specify the service-policy for those interfaces. A policy map attached to an interface can be modified. policy-map-output - creates an output policy map. service-queue Assign a class map and QoS policy to different queues. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-name] To remove the queue assignment, use the no service-queue queue-id [classmap class-map-name] [qos-policy qos-policy-name] command. Parameters queue-id class-map classmap-name Enter the value used to identify a queue. The range is 0 to 7 on the ESeries (eight queues per interface), 0 to 3 on the C-Series and SSeries (four queues per interface; four queues are reserved for control traffic). (OPTIONAL) Enter the keyword class-map followed by the class map name assigned to the queue in character format (16 character maximum). 1331