Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 1076

show lldp neighbors Display LLDP neighbor information for all interfaces or a specified interface. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters show lldp neighbors [interface] [detail] interface (OPTIONAL) Enter the following keywords and slot/port or number information: • For a Fast Ethernet interface, enter the keyword FastEthernet followed by the slot/ port information. • For a 1-Gigabit Ethernet interface, enter the keyword gigabitEthernet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword tenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. detail (OPTIONAL) Enter the keyword detail to display all the TLV information, remote management IP addresses, timers, and LLDP tx and rx counters. Defaults Command Modes Command History none EXEC Privilege Version 9.1.(0.0) Version 8.3.11.1 Version 8.5.1.0 Version 8.3.7.0 Version 7.7.1.0 Version 7.6.1.0 Version 7.4.1.0 Modified output of detail parameter to display remote management IP addresses. Introduced on the Z9000. Added support for 4-port 40G line cards on ExaScale. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information Example Omitting the keyword detail displays only the remote chassis ID, Port ID, and Dead Interval. R1(conf-if-gi-1/31)#do show lldp neighbors Loc PortID Rem Host Name Rem Port Id Rem Chassis Id Gi 1/21 R2 GigabitEthernet 2/11 00:01:e8:06:95:3e Gi 1/31 R3 GigabitEthernet 3/11 00:01:e8:09:c2:4a 1076