Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 1110

show spanning-tree msti View the multiple spanning tree instance. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters Command Modes Command History Usage Information Example show spanning-tree msti [instance-number [brief]] [guard] instance-number brief guard (Optional) Enter the multiple spanning tree instance number. The range is 0 to 63. (Optional) Enter the keyword brief to view a synopsis of the MST instance. (Optional) Enter the keyword guard to display the type of guard enabled on an MSTP interface and the current port state. • EXEC • EXEC Privilege Version 8.3.11.1 Version 8.4.2.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 Version 6.4.1.0 Introduced on the Z9000. Support for the optional keyword guard was added on the C-Series, S-Series, and E-Series TeraScale. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Expanded to display the port error disable state (EDS) caused by loopback BPDU inconsistency. You must enable the multiple spanning tree protocol prior to using this command. FTOS#show spanning-tree msti 10 MSTI 10 VLANs mapped 101-105 Bridge Identifier has priority 32768, Address 0001.e802.3506 Configured hello time 2, max age 20, forward delay 15, max hops 5 Current root has priority 16384, Address 0001.e800.0a5c Number of topology changes 0, last change occurred 3058087 Port 82 (GigabitEthernet 2/0) is designated Forwarding Port path cost 0, Port priority 128, Port Identifier 128.82 Designated root has priority 16384, address 0001.e800.0a:5c Designated bridge has priority 32768, address 0001.e802.35:06 Designated port id is 128.82, designated path cost Number of transitions to forwarding state 1 BPDU (Mrecords): sent 1109, received 0 The port is not in the portfast mode Port 88 (GigabitEthernet 2/6) is root Forwarding 1110