Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 920

resequence access-list Re-assign sequence numbers to entries of an existing access-list. C-Series, E-Series, S-Series Syntax Parameters resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum Step-to-Increment} ipv4 | ipv6 | mac access-list-name StartingSeqNum Step-toIncrement Enter the keyword ipv4, ipv6 or mac to identify the access list type to resequence. Enter the name of a configured IP access list, up to 140 characters. Increased name string to accept up to 140 characters. Prior to version 7.8.1.0, names are up to 16 characters long. Enter the starting sequence number to resequence. The range is 0 to 4294967290. Enter the step to increment the sequence number. The range is 1 to 4294967290. Defaults Command Modes none • EXEC • EXEC Privilege Command History Version 8.4.2.0 Version 8.2.1.0 Version 7.8.1.0 Version 7.4.1.0 Introduced on the S-Series. Introduced on the E-Series ExaScale. Introduced on the C-Series. Introduced on the E-Series TeraScale. Usage Information Related Commands When all sequence numbers have been exhausted, this feature permits re-assigning new sequence number to entries of an existing access-list. resequence prefix-list ipv6 - resequences a prefix list. resequence prefix-list ipv6 Re-assign sequence numbers to entries of an existing prefix list. C-Series, E-Series, S-Series Syntax resequence prefix-list ipv6 {prefix-list-name StartingSeqNum Step-to-increment} 920