Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 1524

• show hardware stack-unit - displays the data plane or management plane input and output statistics of the designated component of the designated stack member. • show system (S-Series) - displays the current status of all stack members or a specific member. • upgrade (S-Series management unit) - upgrades the bootflash image or system image of the S-Series management unit. stack-unit priority Configure the ability of an S-Series switch to become the management unit of a stack. S-Series Syntax Parameters stack-unit 0-7 priority 1-14 0-7 Enter the stack member unit identifier, from 0 to 7, of the switch on which you want to set the management priority. 1-14 This preference parameter allows you to specify the management priority of one backup switch over another, with 0 the lowest priority and 14 the highest. The switch with the highest priority value is chosen to become the management unit if the active management unit fails or on the next reload. Defaults Command Modes Command History 0 CONFIGURATION Version 7.7.1.0 Introduced on the S-Series. Related Commands • reload - reboots FTOS. • show system (S-Series) - displays the status of all stack members or a specific member. stack-unit provision Preconfigure a logical stacking ID of a switch that joins the stack. This is an optional command that is executed on the management unit. S-Series Syntax stack-unit 0-11 provision {S25N|S25P|S25V|S50N|S50V|S4810} 1524