Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 72

system image (the one from which the RPM booted) is automatically configured as the secondary image path. FTOS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP. NOTE: The keywords boot-image, synchronize-rpm, and external are used on the Primary RPM only. copy running-config startup-config Copy running configuration to the startup configuration. C-Series, E-Series Syntax Command Modes Command History copy running-config startup-config {duplicate} EXEC Privilege Version 7.5.1.0 Version 6.3.1.0 Introduced on the C-Series Introduced Usage Information This command is useful for quickly making a changed configuration on one chassis available on external flash in order to move it to another chassis. When you use the copy running-config startup-config duplicate command to copy the running configuration to the startup configuration, FTOS creates a backup file on the internal flash of the startup configuration. delete Delete a file from the flash. After deleted, files cannot be restored. C-Series, E-Series, S-Series Syntax Parameters delete flash-url [no-confirm] flash-url Enter the following location and keywords: • For a file or directory on the internal Flash, enter flash:// followed by the filename or directory name. • For a file or directory on the external Flash, enter slot0:// followed by the filename or directory name. no-confirm (OPTIONAL) Enter the keyword no-confirm to specify that FTOS does not require user input for each file prior to deletion. 72