Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 66

• For a file on an FTP server, enter ftp://user:password@hostip/ filepath • For a file on a TFTP server, enter tftp://hostip/filepath Defaults Command Modes Command History Usage Information Related Commands none CONFIGURATION Version 7.5.1.0 E-Series Introduced on C-Series Original command To display these changes in the show bootvar command output, save the running configuration to the startup configuration (using the copy command). show bootvar - displays the variable settings for the E-Series boot parameters. boot system (S4810 and Z9000) Tell the system where to access the FTOS image used to boot the system. Z-Series, S4810 Syntax Parameters Defaults This command was deprecated in FTOS 8.3.12.0. boot system {gateway ip address| stack-unit [{0-11 | 0-7]| all] [default | primary {system {A: | B:} | tftp: | | secondary]} To return to the default boot sequence, use the no boot system command. gateway stack-unit ip-address 0-11, 0-7, all default primary secondary tftp: A: | B: Not configured. Enter the IP address of the default next-hop gateway for the management subnet. Enter the stack-unit number for the master switch. Enter an IP address in dotted decimal format. Enter the stack-unit number. The S4810 range is 0 to 11. The Z9000 range is 0 to 7. Enter the keyword default to use the primary FTOS image. Enter the keyword primary to use the primary FTOS image. Enter the keyword secondary to use the primary FTOS image. Enter the keyword TFTP: to retrieve the image from a TFTP server. tftp://hostip/filepath. Enter A: or B: to boot one of the system partitions. 66