Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 208

mep cross-check start-delay Configure the amount of time the system waits for a remote MEP to come up before the cross-check operation is started. S-Series, S4810 Syntax Parameters mep cross-check start-delay number start-delay number Enter a start-delay in seconds. The range is 3 to 100 seconds. Defaults Command Modes Command History 3 ccms ETHERNET CFM Version 8.3.7.0 Version 8.3.1.0 Introduced on the S4810. Introduced on the S-Series. ping ethernet Send a loopback message. S-Series, S4810 Syntax Parameters ping ethernet domain [name l level] ma-name ma-name remote {dest-mep-id | mac-addr mac-address} source {src-mep-id | port interface} name | level ma-name maname dest-mep-id mac-addr macaddress src-mep-id port interface Enter the domain name or level. Enter the keyword ma-name and then enter the maintenance association name. Enter the MEP ID that is the target of the ping. Enter the keyword mac-addr and then enter the MAC address that is the target of the ping. Enter the MEP ID that originates the ping. Enter the keyword port and then enter the interface that originates the ping. Defaults Command Modes none EXEC Privilege 208