Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 1119

Related Commands show ip mroute - views the E-Series routing table. ip multicast-lag-hashing Distribute multicast traffic among port channel members in a round-robin fashion. E-Series Syntax ip multicast-lag-hashing To revert to the default, use the no ip multicast-lag-hashing command. Defaults Command Modes Command History Disabled. CONFIGURATION Version 6.3.1.0 Introduced on the E-Series. Usage Information Related Commands By default, one port channel member is chosen to forward multicast traffic. With this feature turned on, multicast traffic is distributed among the port channel members in a round-robin fashion. This feature applies to the routed multicast traffic. If you turn on internet group management protocol (IGMP) snooping, this feature also applies to switched multicast traffic. ip multicast-limit - enables IP multicast forwarding. ip multicast-limit Use this feature to limit the number of multicast entries on the system. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters ip multicast-limit limit limit Enter the desired maximum number of multicast entries on the system. The E-Series range is 50000, the C-Series range is 1 to 10000, and the S-Series range is 1 to 2000. Defaults • E-Series Default: 15000. • C-Series Default: 4000. • S-Series Default: 400. Command Modes Command History CONFIGURATION Version 8.3.7.0 Version 7.8.1.0 Version 7.6.1.0 Introduced on the S4810. Introduced on the C-Series. Introduced on the E-Series. 1119