Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 1118

ip mroute Assign a static mroute. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax ip mroute destination mask {ip-address | null 0| {{bgp| ospf} process-id | isis | rip | static} {ip-address | tag | null 0}} [distance] To delete a specific static mroute, use the ip mroute destination mask {ipaddress | null 0| {{bgp| ospf} process-id | isis | rip | static} {ip-address | tag | null 0}} [distance] command. To delete all mroutes matching a certain mroute, use the no ip mroute destination mask command. Parameters destination mask null 0 [protocol [process-id | tag] ip-address] Enter the IP address in dotted decimal format of the destination device. Enter the mask in slash prefix formation ( /x ) or in dotted decimal format. (OPTIONAL) Enter the keyword null followed by zero (0). (OPTIONAL) Enter one of the routing protocols: • Enter the BGP as-number followed by the IP address in dotted decimal format of the reverse path forwarding (RPF) neighbor. The range is 1 to 65535. • Enter the OSPF process identification number followed by the IP address in dotted decimal format of the RPF neighbor. the range is 1 to 65535. • Enter the IS-IS alphanumeric tag string followed by the IP address in dotted decimal format of the RPF neighbor. • Enter the RIP IP address in dotted decimal format of the RPF neighbor. static ip-address ip-address distance (OPTIONAL) Enter the Static IP address in dotted decimal format of the RPF neighbor. (OPTIONAL) Enter the IP address in dotted decimal format of the RPF neighbor. (OPTIONAL) Enter a number as the distance metric assigned to the mroute. The range is 0 to 255. Defaults Command Modes Command History Not configured. CONFIGURATION Version 8.3.7.0 E-Series legacy command Introduced on the S4810. 1118