Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 1080

Related Commands debug lldp interface - debugs LLDP. show lldp neighbors - displays the LLDP neighbors. show running-config lldp - displays the LLDP running configuration. advertise med location-identification Configure the system to advertise a location identifier. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax advertise med location-identification {coordinate-based value | civic-based value | ecs-elin value} To return to the default, use the no advertise med location-identification {coordinate-based value | civic-based value | ecs-elin value} command. Parameters coordinate-based value civic-based value ecs-elin value Enter the keywords coordinate-based followed by the coordinated based location in hexadecimal value of 16 bytes. Enter the keywords civic-based followed by the civic based location in hexadecimal format. The range is 6 to 255 bytes. Enter the keywords ecs-elin followed by the Emergency Call Service (ecs) Emergency Location Identification Number (elin) numeric location string. The range is 10 to 25 characters. Defaults Command Modes Command History unconfigured. CONFIGURATION (conf-lldp) Version 8.3.11.1 Version 8.3.7.0 Version 7.7.1.0 Version 7.6.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series and E-Series. Usage Information • ECS - Emergency call service such as defined by TIA or the national emergency numbering association (NENA) • ELIN - Emergency location identification number, a valid North America Numbering Plan format telephone number supplied for ECS purposes. Related Commands debug lldp interface - debugs LLDP. show lldp neighbors - displays the LLDP neighbors. show running-config lldp - displays the LLDP running configuration. 1080