Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 1113

pre-Version 6.2.1.0 Introduced on the E-Series. spanning-tree msti Configure multiple spanning tree instance cost and priority for an interface. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters spanning-tree msti instance {cost cost | priority priority} msti instance cost cost Enter the keyword msti and the MST instance number. The range is zero (0) to 63. (OPTIONAL) Enter the keyword cost followed by the port cost value. The range is 1 to 200000. The defaults are: • 100 Mb/s Ethernet interface = 200000 • 1-Gigabit Ethernet interface = 20000 • 10-Gigabit Ethernet interface = 2000 • Port Channel interface with one 100 Mb/s Ethernet = 200000 • Port Channel interface with one 1-Gigabit Ethernet = 20000 • Port Channel interface with one 10-Gigabit Ethernet = 2000 • Port Channel with two 1-Gigabit Ethernet = 18000 • Port Channel with two 10-Gigabit Ethernet = 1800 • Port Channel with two 100-Mbps Ethernet = 180000 priority priority Enter keyword priority followed by a value in increments of 16 as the priority. The range is 0 to 240. The default is 128. Defaults • cost = depends on the interface type • priority = 128 Command Modes Command History INTERFACE Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 Version 6.5.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. 1113