Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 52

When another user enters CONFIGURATION mode, FTOS sends a message similar to the following: % Warning: User "admin" on line vty2 "172.16.1.210" is in configuration In this case, the user is "admin" on vty2. Obtaining Help As soon as you are in a command mode there are several ways to access help. To obtain a list of keywords at any command mode: Type a ? at the prompt or after a keyword. There must always be a space before the ?. To obtain a list of keywords with a brief functional description: Type help at the prompt. To obtain a list of available options: Type a keyword and then type a space and a ?. To obtain a list of partial keywords using a partial keyword: Type a partial keyword and then type a ?. Example The following is an example of typing ip ? at the prompt: FTOS(conf)#ip ? access-list as-path community-list domain-list name domain-lookup translation domain-name fib ftp host max-frag-count assembly multicast-routing name-server pim Protocol prefix-list radius redirect-list route scp source-route options ssh tacacs telnet tftp trace-group trace-list FTOS(conf)#ip Named access-list BGP autonomous system path filter Add a community list entry Domain name to complete unqualified host Enable IP Domain Name System hostname Define the default domain name FIB configuration commands FTP configuration commands Add an entry to the ip hostname table Max. fragmented packets allowed in IP reEnable IP multicast forwarding Specify address of name server to use Independent Multicast Build a prefix list Interface configuration for RADIUS Named redirect-list Establish static routes SCP configuration commands Process packets with source routing header SSH configuration commands Interface configuration for TACACS+ Specify telnet options TFTP configuration commands Named trace-list Named trace-list 52