Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 1043

Command Modes Command History Usage Information interface interface-type vlan vlan-id count • For a SONET interface, enter the keyword sonet followed by the slot/ port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. (OPTIONAL) Instead of entering the keyword interface followed by the interface type, slot and port information, as above, you can enter the interface type, followed by just a slot number. (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display the MAC address assigned to the VLAN. The range is 1 to 4094. (OPTIONAL) Enter the keyword count, followed optionally, by an interface or VLAN ID, to display total or interface-specific static addresses, dynamic addresses, and MAC addresses in use. • EXEC • EXEC Privilege Version 8.3.11.1 Version 8.3.12.0 Version 8.5.1.0 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.2.1.1 Introduced on the Z9000. Updated the output. Added support for 4-port 40G line cards on ExaScale. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. The following describes the show mac-address-table command shown in the Example below. Column Heading VlanId Mac Address Type Interface Description Displays the VLAN ID number. Displays the MAC address in nn:nn:nn:nn:nn:nn format. Lists whether the MAC address was manually configured (Static), learned dynamically (Dynamic), or associated with a specific port (Sticky). Displays the interface type and slot/port information. The following abbreviations describe the interface types: • gi - Gigabit Ethernet followed by a slot/port. 1043