Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 1241

FTOS(conf)#int gig 1/1 FTOS(config-if-gi-1/1)# ip pim ingress-interface-map map1 ip pim neighbor-filter Configure this feature to prevent a router from participating in protocol independent multicast (PIM). C-Series, E-Series, S-Series, Z-Series, S4810 Syntax ip pim neighbor-filter {access-list} To remove the restriction, use the no ip pim neighbor-filter {access-list} command. Parameters access-list Enter the name of a standard access list. Maximum 16 characters. Defaults Command Modes Command History none CONFIGURATION Version 8.3.11.1 Version 8.3.7.0 Version 8.1.1.0 Version 7.8.1.0 Version 7.6.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the C-Series and S-Series. Introduced on the E-Series. Usage Information Do not enter this command before creating the access-list. ip pim query-interval Change the frequency of PIM Router-Query messages. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax ip pim query-interval seconds To return to the default value, use the no ip pim query-interval seconds command. Parameters seconds Enter a number as the number of seconds between router query messages. The range: 0 to 65535. The default is 30 seconds. Defaults Command Modes Command History 30 seconds INTERFACE Version 8.3.11.1 Version 8.3.7.0 Introduced on the Z9000. Introduced on the S4810. 1241