Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 629

show interface dcbx detail Displays the DCBX configuration on an interface. S4810 Syntax Parameters show interface port-type slot/port dcbx detail port-type slot/port Enter the port type. Enter the slot/port number. Command Modes Command History EXEC Privilege Version 8.3.12.0 Version 8.3.16.0 Introduced on the S4810. Introduced on the MXL 10/40GbE Switch IO Module. Usage Information To clear DCBX frame counters, use the clear dcbx counters interface stackunit/port command. The following describes the show interface dcbx detail command shown in the Example below. Field Interface Port-Role DCBX Operational Status Configuration Source Local DCBX Compatibility mode Local DCBX Configured mode Peer Operating version Local DCBX TLVs Transmitted Local DCBX Status: DCBX Operational Version Description Interface type with chassis slot and port number. Configured the DCBX port role: auto-upstream, auto-downstream, config-source, or manual. Operational status (enabled or disabled) used to elect a configuration source and internally propagate a DCB configuration. The DCBX operational status is the combination of PFC and ETS operational status. Specifies whether the port serves as the DCBX configuration source on the switch: true (yes) or false (no). DCBX version accepted in a DCB configuration as compatible. In auto-upstream mode, a port can only receive a DCBX version supported on the remote peer. DCBX version configured on the port: CEE, CIN, IEEE v2.5, or Auto (port auto-configures to use the DCBX version received from a peer). DCBX version that the peer uses to exchange DCB parameters. Transmission status (enabled or disabled) of advertised DCB TLVs (see TLV code at the top of the show command output). DCBX version advertised in Control TLVs. 629