Dell Force10 S4810P FTOS Command Line Reference Guide for the S4810 System FTO - Page 1634

preempt Permit a BACKUP router with a higher priority value to preempt or become the MASTER router. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Defaults Command Modes Command History preempt To prohibit preemption, use the no preempt command. Enabled (that is, a BACKUP router can preempt the MASTER router). VRRP Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.2.1.1 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. priority Specify a VRRP priority value for the VRRP group. This value is used by the VRRP protocol during the MASTER election process. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters priority priority To return to the default value, use the no priority command. priority Enter a number as the priority. Enter 255 only if the router's virtual address is the same as the interface's primary IP address (that is, the router is the OWNER). The range is 1 to 255. The default is 100. Defaults Command Modes Command History 100 VRRP Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. 1634