Epson EPL-7000 User Manual - Page 128

Using Your Printer with Application Software HP LaserJet series IIP emulation mode If you have not changed the factory setting, your printer is in HP emulation mode. Simply use your application program's setup menu to choose the first printer available from the list of printers below. They are listed in order of preference. (For more about HP emulation, see Appendix C.) HP LaserJet series IIP™ HP LaserJet series II™ HP LaserJet Plus™ HP LaserJet 500™ HP LaserJet™ If none of these printers are listed among your program's options, select any printer that uses the HP Printer Command Language (PCL). Epson LQ and FX emulation modes Make sure you have set the SelecType Level 2 MODE option to LQ or FX as described in Chapter 3. Then, use your application program's setup menu to select a corresponding printer driver from the list below. They are listed in order of preference. LQ Mode FX Mode SQ-2500 FX-1000/800 (286e/86e) LQ-2500 FX-85 LQ-1050/850 FX-80 LQ-1000/800 (expanded ESC/P) LQ-500 LQ-1500 (with version 2 ROM) LQ printer If none of the printers listed above are available from your program, choose the first available of the following: EX, JX, LX, RX, MX, Epson printer, Standard printer, or Draft printer. Application Software 5-3