Epson EPL-7000 User Manual - Page 53
SelecType mode., After you print the test pattern, press
View all Epson EPL-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Testing the Printer Part of a typical pattern 1 test print is shown below: After the page has been printed, the printer returns to the main menu and the display shows TEST PRINT. If you want to print the second test print pattern, follow these additional steps: 4. Press I,( once; then change the test pattern number by pressing or once to display the following: 5. Press I,( to print the second pattern. After you print the test pattern, press SelecType once to exit SelecType mode. If the test pattern prints correctly, you can skip to the section on connecting the printer to your computer later in this chapter. If the test print does not operate properly, see Chapter 7 for troubleshooting information. 2-12 Testing and Connecting Your Printer
Testing the Printer
Part of a typical pattern 1 test print is shown below:
After the page has been printed,
the
printer returns to the main
menu and
the
display shows TEST PRINT.
If you
want
to print the second test print pattern, follow these
additional steps:
4. Press I,( once; then change
the
test pattern number by
pressing
or
once to display the following:
5. Press I,( to print the second pattern.
After you print the test pattern, press
SelecType
once to
exit
SelecType mode.
If the test pattern prints correctly, you can skip to the section
on
connecting the printer to your computer later in this chapter. If
the
test print does not operate properly, see Chapter 7 for
troubleshooting information.
2-12
Testing and Connecting Your Printer