Epson EPL-7000 User Manual - Page 262
Installing the chip set, Before you install the chip set on the controller board, determine
View all Epson EPL-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
The Memory Chip Set 5. Grasping the board with both hands, pull it straight out of the printer and set it on a clean, stable surface with the bracket (connector) to the right-hand side, as shown below. Installing the chip set To install the memory chip set you need a chip puller or a flat-head screwdriver. If you have questions about installing the chip set, contact your dealer for assistance. Before you install the chip set on the controller board, determine where to install it. The amount of RAM already installed on the board determines the location for the new chip set. All four-chips in one set must be installed at the same time. A-34 Appendix A
The Memory Chip Set
5.
Grasping the board with both hands, pull it straight out of the
printer and set it on a clean, stable surface with the bracket
(connector) to the right-hand side, as shown below.
Installing the chip set
To install the memory chip set you need a chip puller or a
flat-head screwdriver. If you have questions about installing the
chip set, contact your dealer for assistance.
Before you install the chip set on the controller board, determine
where to install it. The amount of RAM already installed on the
board determines the location for the new chip set. All four-chips
in one set must be installed at the same time.
A-34
Appendix A