Epson EPL-7000 User Manual - Page 234

The Font Cartridges 5. If the power is on, press ON LINE to set the printer on line. If the power is off, simply turn on the printer. Now that you have inserted a font cartridge, you can select the fonts you want to print using SelecType or your application program. Selecting a font with your application program When the printer is in HP emulation mode, you can use your application program to select the fonts you want to print. First be sure you selected HP LaserJet series IIP or a similar printer from the program's setup or installation menu. For more information on which printers to choose when you set up your application program, see the section on using your printer with software in Chapter 5. After you set up your application program, you can specify the fonts you want using the commands available in the program. If your program does not provide commands that allow you to select the font you want, you can select fonts using SelecType menus or printer command sequences. Most application programs, however, allow you to select fonts, and you should not have to use SelecType or printer commands to do so. To select a font using SelecType, see the next section. For information on printer commands, see Appendix B. Also see your software manual for information on how to use printer command sequences. A-6 Appendix A