Epson EPL-7000 User Manual - Page 76

Selecting Channel and Mode The HP emulation mode offers the widest range of features, but you may also want to select other modes to use software written specifically for other printers. You must change the MODE setting before you can operate your printer as an Epson LQ-2500 or FX-86e/286e printer. Setting the channel and printer mode with the CH CONFIG option To change the channel and the printer mode, first you must set the rate of printer memory sharing with the MEMORY SHARE option. Until you set this option, you cannot select Channel S. CAUTION: Do not change the MEMORY SHARE option until you have installed additional memory in the printer. You could damage the printer. See Appendix A for information an adding memory. Follow the steps below to change the CH CONFIG option. This example describes selecting Channel P and setting the printer mode to LQ emulation mode. 1. Hold down the SelecType button until you enter SelecType Level 2. The Level 2 light goes on. One of the Level 2 main menus appears on the display. 2. Press or until the CH CONFIG option appears. 3. Press shows: to enter the CH CONFIG option. The display SelecType 3-13